🎉 Up to 70% Off Selected ItemsShop Sale
BSD Ben Severson T-20 PP Bodyboard
HomeStore

BSD Ben Severson T-20 PP Bodyboard

BSD Ben Severson T-20 PP Bodyboard

The BSD T-20, an iconic classic remastered to suit modern times. The new 2021 range is the very last of the limited edition numbered boards, so if you're in the market for a slice of history, this is your last chance.

----- 
Bodyboard Features;
Inner Core - 1.9lb Polypro
Stringer - 1 x CFT Stringer
Rails - 50/50 Double Rails
Channels - Hull
Slick - Surlyn
Deck - Wavecushion Air 8lb PE
Tail - Clipped Crescent
Additional Features - CNC Shaped
Manufacturing Country - Indonesia

  • Understanding this bodyboard's technology

    Kinetic Bodyboard information at Inverted Bodyboarding
    1.9lb Kinetic PP (Indonesia)
    Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
    CFT Stringer INformation at INverted Bodyboarding Carbon Fibre/ CFT Stringer
    Lightweight filament wound carbon composite rod offering rigidity and durability.
    55 45 Rail information at Inverted Bodyboarding
    50/50 Rails
    This rail setup offers the best of both worlds. A good amount of upper rail in the water allows increased drive, whilst a good amount of lower rail promotes control.
    Slotted Channel information at Inverted Bodyboarding
    Slotted Channels
    Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves. 
    Surlyn plastic bodyboarding information at INverted
    DuPont Surlyn Slick
    Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
    Wave core PE deck skin on a bodyboard
    Wavecushion 8lb NXLPE (Indo) Decking
    Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
    Clipped Crescent Tail Information at Inverted Bodyboarding
    Clipped Crescent Tail
    The clipped crescent tail is the most popular crescent tail option.  This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
    CNC Shaping information at Inverted Bodyboarding
    CNC Shaping
    Short for “computer numerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
    Indonesia bodyboard manufacturing information at Inverted Bodyboarding
    Manufacturing Country: Indonesia/ Broady
    Bodyboards that come from Indonesia come out of Nick Mesritz’s factory. Nick Mesritz is the owner and shaper of both NMD and VS bodyboards and has more than 20 years experience in shaping, testing and creating wavecraft.
Select Size
Select Colour
From $336.43
BSD Ben Severson T-20 PP Bodyboard—
$336.43

More Images

BSD Ben Severson T-20 PP Bodyboard - Image 2

BSD Ben Severson T-20 PP Bodyboard

The BSD T-20, an iconic classic remastered to suit modern times. The new 2021 range is the very last of the limited edition numbered boards, so if you're in the market for a slice of history, this is your last chance.

----- 
Bodyboard Features;
Inner Core - 1.9lb Polypro
Stringer - 1 x CFT Stringer
Rails - 50/50 Double Rails
Channels - Hull
Slick - Surlyn
Deck - Wavecushion Air 8lb PE
Tail - Clipped Crescent
Additional Features - CNC Shaped
Manufacturing Country - Indonesia

  • Understanding this bodyboard's technology

    Kinetic Bodyboard information at Inverted Bodyboarding
    1.9lb Kinetic PP (Indonesia)
    Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
    CFT Stringer INformation at INverted Bodyboarding Carbon Fibre/ CFT Stringer
    Lightweight filament wound carbon composite rod offering rigidity and durability.
    55 45 Rail information at Inverted Bodyboarding
    50/50 Rails
    This rail setup offers the best of both worlds. A good amount of upper rail in the water allows increased drive, whilst a good amount of lower rail promotes control.
    Slotted Channel information at Inverted Bodyboarding
    Slotted Channels
    Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves. 
    Surlyn plastic bodyboarding information at INverted
    DuPont Surlyn Slick
    Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
    Wave core PE deck skin on a bodyboard
    Wavecushion 8lb NXLPE (Indo) Decking
    Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
    Clipped Crescent Tail Information at Inverted Bodyboarding
    Clipped Crescent Tail
    The clipped crescent tail is the most popular crescent tail option.  This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
    CNC Shaping information at Inverted Bodyboarding
    CNC Shaping
    Short for “computer numerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
    Indonesia bodyboard manufacturing information at Inverted Bodyboarding
    Manufacturing Country: Indonesia/ Broady
    Bodyboards that come from Indonesia come out of Nick Mesritz’s factory. Nick Mesritz is the owner and shaper of both NMD and VS bodyboards and has more than 20 years experience in shaping, testing and creating wavecraft.

Product Information

Shipping & Returns

Description

The BSD T-20, an iconic classic remastered to suit modern times. The new 2021 range is the very last of the limited edition numbered boards, so if you're in the market for a slice of history, this is your last chance.

----- 
Bodyboard Features;
Inner Core - 1.9lb Polypro
Stringer - 1 x CFT Stringer
Rails - 50/50 Double Rails
Channels - Hull
Slick - Surlyn
Deck - Wavecushion Air 8lb PE
Tail - Clipped Crescent
Additional Features - CNC Shaped
Manufacturing Country - Indonesia

  • Understanding this bodyboard's technology

    Kinetic Bodyboard information at Inverted Bodyboarding
    1.9lb Kinetic PP (Indonesia)
    Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
    CFT Stringer INformation at INverted Bodyboarding Carbon Fibre/ CFT Stringer
    Lightweight filament wound carbon composite rod offering rigidity and durability.
    55 45 Rail information at Inverted Bodyboarding
    50/50 Rails
    This rail setup offers the best of both worlds. A good amount of upper rail in the water allows increased drive, whilst a good amount of lower rail promotes control.
    Slotted Channel information at Inverted Bodyboarding
    Slotted Channels
    Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves. 
    Surlyn plastic bodyboarding information at INverted
    DuPont Surlyn Slick
    Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
    Wave core PE deck skin on a bodyboard
    Wavecushion 8lb NXLPE (Indo) Decking
    Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
    Clipped Crescent Tail Information at Inverted Bodyboarding
    Clipped Crescent Tail
    The clipped crescent tail is the most popular crescent tail option.  This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
    CNC Shaping information at Inverted Bodyboarding
    CNC Shaping
    Short for “computer numerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
    Indonesia bodyboard manufacturing information at Inverted Bodyboarding
    Manufacturing Country: Indonesia/ Broady
    Bodyboards that come from Indonesia come out of Nick Mesritz’s factory. Nick Mesritz is the owner and shaper of both NMD and VS bodyboards and has more than 20 years experience in shaping, testing and creating wavecraft.