🎉 Up to 70% Off Selected ItemsShop Sale
QCD Drive PPHD Bodyboard
HomeStore

QCD Drive PPHD Bodyboard

QCD Drive PPHD Bodyboard

The QCD Drive with its PP core offers ideal buoyancy and rigidity for the intermediate bodyboarder looking to take their performance to the next level.

-----

Bodyboard Features;
Inner Core - 1.9lb Polypro
Stringer - 1 x CFT Stringer
Rails - 55/45 Double Rails
Channels - Slotted Channels
Slick - HD
Deck - Wavecushion Air 8lb PE
Tail - Clipped Crescent
Additional Features - CNC Shaped, Mesh, XFL Armour and Nose Bulbs.
Manufacturing Country - Indonesia

Understanding this bodyboard's technology

Kinetic Bodyboard information at Inverted Bodyboarding
1.9lb Kinetic PP (Indonesia)
Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
CFT Stringer INformation at INverted Bodyboarding Carbon Fibre/ CFT Stringer
Lightweight filament wound carbon composite rod offering rigidity and durability.
55 45 Rail information at Inverted Bodyboarding
55/45 Rails
This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
Slotted Channel information at Inverted Bodyboarding
Slotted Channels
Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves. 
HDPE Plastic Slick Bodyboard information at Inverted Bodyboarding
HDPE Slick
HDPE is a high density plastic. This plastic is hard wearing and very stiff. Whilst it will perform as per the norm, it is more prone to creasing when under heavy stress as for its high density properties.
Mesh information at Inverted Bodyboarding
Mesh
Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
Wave core PE deck skin on a bodyboard
Wavecushion 8lb NXLPE (Indo) Decking
Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
Clipped Crescent Tail information at Inverted bodyboarding
Clipped Crescent Tail
The clipped crescent tail is the most popular crescent tail option.  This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
Nose bulb information at Inverted bodyboarding
Nose Bulbs
Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
CNC Shaping information at Inverted Bodyboarding
CNC Shaping
Short for “computer numerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
Indonesia bodyboard manufacturing information at Inverted Bodyboarding
Manufacturing Country: Indonesia/ Broady
The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.
Select Size
Select Colour
From $87.13

Original: $248.95

-65%
QCD Drive PPHD Bodyboard—

$248.95

$87.13

More Images

QCD Drive PPHD Bodyboard - Image 2
QCD Drive PPHD Bodyboard - Image 3

QCD Drive PPHD Bodyboard

The QCD Drive with its PP core offers ideal buoyancy and rigidity for the intermediate bodyboarder looking to take their performance to the next level.

-----

Bodyboard Features;
Inner Core - 1.9lb Polypro
Stringer - 1 x CFT Stringer
Rails - 55/45 Double Rails
Channels - Slotted Channels
Slick - HD
Deck - Wavecushion Air 8lb PE
Tail - Clipped Crescent
Additional Features - CNC Shaped, Mesh, XFL Armour and Nose Bulbs.
Manufacturing Country - Indonesia

Understanding this bodyboard's technology

Kinetic Bodyboard information at Inverted Bodyboarding
1.9lb Kinetic PP (Indonesia)
Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
CFT Stringer INformation at INverted Bodyboarding Carbon Fibre/ CFT Stringer
Lightweight filament wound carbon composite rod offering rigidity and durability.
55 45 Rail information at Inverted Bodyboarding
55/45 Rails
This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
Slotted Channel information at Inverted Bodyboarding
Slotted Channels
Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves. 
HDPE Plastic Slick Bodyboard information at Inverted Bodyboarding
HDPE Slick
HDPE is a high density plastic. This plastic is hard wearing and very stiff. Whilst it will perform as per the norm, it is more prone to creasing when under heavy stress as for its high density properties.
Mesh information at Inverted Bodyboarding
Mesh
Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
Wave core PE deck skin on a bodyboard
Wavecushion 8lb NXLPE (Indo) Decking
Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
Clipped Crescent Tail information at Inverted bodyboarding
Clipped Crescent Tail
The clipped crescent tail is the most popular crescent tail option.  This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
Nose bulb information at Inverted bodyboarding
Nose Bulbs
Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
CNC Shaping information at Inverted Bodyboarding
CNC Shaping
Short for “computer numerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
Indonesia bodyboard manufacturing information at Inverted Bodyboarding
Manufacturing Country: Indonesia/ Broady
The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.

Product Information

Shipping & Returns

Description

The QCD Drive with its PP core offers ideal buoyancy and rigidity for the intermediate bodyboarder looking to take their performance to the next level.

-----

Bodyboard Features;
Inner Core - 1.9lb Polypro
Stringer - 1 x CFT Stringer
Rails - 55/45 Double Rails
Channels - Slotted Channels
Slick - HD
Deck - Wavecushion Air 8lb PE
Tail - Clipped Crescent
Additional Features - CNC Shaped, Mesh, XFL Armour and Nose Bulbs.
Manufacturing Country - Indonesia

Understanding this bodyboard's technology

Kinetic Bodyboard information at Inverted Bodyboarding
1.9lb Kinetic PP (Indonesia)
Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
CFT Stringer INformation at INverted Bodyboarding Carbon Fibre/ CFT Stringer
Lightweight filament wound carbon composite rod offering rigidity and durability.
55 45 Rail information at Inverted Bodyboarding
55/45 Rails
This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
Slotted Channel information at Inverted Bodyboarding
Slotted Channels
Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves. 
HDPE Plastic Slick Bodyboard information at Inverted Bodyboarding
HDPE Slick
HDPE is a high density plastic. This plastic is hard wearing and very stiff. Whilst it will perform as per the norm, it is more prone to creasing when under heavy stress as for its high density properties.
Mesh information at Inverted Bodyboarding
Mesh
Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
Wave core PE deck skin on a bodyboard
Wavecushion 8lb NXLPE (Indo) Decking
Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
Clipped Crescent Tail information at Inverted bodyboarding
Clipped Crescent Tail
The clipped crescent tail is the most popular crescent tail option.  This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
Nose bulb information at Inverted bodyboarding
Nose Bulbs
Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
CNC Shaping information at Inverted Bodyboarding
CNC Shaping
Short for “computer numerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
Indonesia bodyboard manufacturing information at Inverted Bodyboarding
Manufacturing Country: Indonesia/ Broady
The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.
QCD Drive PPHD Bodyboard | Inverted Bodyboarding