🎉 Up to 70% Off Selected ItemsShop Sale
Science Mike 7-7 LiteFlex 1.2lb Bodyboard
HomeStore

Science Mike 7-7 LiteFlex 1.2lb Bodyboard

Science Mike 7-7 LiteFlex 1.2lb Bodyboard

-----
Bodyboard Features;
Inner Core - 1.2lb Polypro
Stringer - 1 x CFT Stringer
Rails - 55/45 Double Rails
Channels - Slotted Channels
Slick - Surlyn
Deck - Cellu-Cushion 8lb PE
Tail - Crescent (Tail Piece)
Additional Features -  Tail Piece, Mesh, XFL Armour and Slick Nose Bulbs.
Manufacturing Country - Broady/ Indonesia 

  • Understanding this bodyboard's technology

    LiteFlex 1.2lb PP
    LiteFlex 1.2lb Polypropylene Core delivers amazing projection and response.
    CFT Stringer INformation at INverted Bodyboarding Carbon Fibre/ CFT Stringer
    Lightweight filament wound carbon composite rod offering rigidity and durability.
    55 45 Rail information at Inverted Bodyboarding
    55/45 Rails
    This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
    Slotted Channel information at Inverted Bodyboarding
    Slotted Channels
    Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves.
    Surlyn plastic bodyboarding information at INverted
    DuPont Surlyn Slick
    Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
    Cellucushion Taiwan Decking information at Inverted Bodyboarding
    Cellu-Cushion 8lb PE (Taiwan) Decking
    Cellu-Cushion is a 8lb decking foam. It offers strength and ensures you get a longer lasting board. The design allows your body to lock with your board when riding, ensuring the board is comfortable to ride and hold.
    Clipped Crescent Tail Information at Inverted Bodyboarding
    Clipped Crescent Tail
    The clipped crescent tail is the most popular crescent tail option.  This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
    Mesh information at Inverted Bodyboarding
    Mesh
    Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
    Nose bulb information at Inverted bodyboarding
    Nose Bulbs
    Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
    Tail Piece for Bodyboards
    Two-Piece Tail
    The tail piece is a separate piece of decking that goes on the crescent tail. Done for aesthetic purposes only and as oppose to rolling the deck all the way down over the tail.
    Indonesia Bodyboard Manufacturing

    Manufacturing Country: Indonesia/ Broady
    The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.

Select Size
Select Colour
From $94.20

Original: $269.14

-65%
Science Mike 7-7 LiteFlex 1.2lb Bodyboard—

$269.14

$94.20

More Images

Science Mike 7-7 LiteFlex 1.2lb Bodyboard - Image 2

Science Mike 7-7 LiteFlex 1.2lb Bodyboard

-----
Bodyboard Features;
Inner Core - 1.2lb Polypro
Stringer - 1 x CFT Stringer
Rails - 55/45 Double Rails
Channels - Slotted Channels
Slick - Surlyn
Deck - Cellu-Cushion 8lb PE
Tail - Crescent (Tail Piece)
Additional Features -  Tail Piece, Mesh, XFL Armour and Slick Nose Bulbs.
Manufacturing Country - Broady/ Indonesia 

  • Understanding this bodyboard's technology

    LiteFlex 1.2lb PP
    LiteFlex 1.2lb Polypropylene Core delivers amazing projection and response.
    CFT Stringer INformation at INverted Bodyboarding Carbon Fibre/ CFT Stringer
    Lightweight filament wound carbon composite rod offering rigidity and durability.
    55 45 Rail information at Inverted Bodyboarding
    55/45 Rails
    This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
    Slotted Channel information at Inverted Bodyboarding
    Slotted Channels
    Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves.
    Surlyn plastic bodyboarding information at INverted
    DuPont Surlyn Slick
    Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
    Cellucushion Taiwan Decking information at Inverted Bodyboarding
    Cellu-Cushion 8lb PE (Taiwan) Decking
    Cellu-Cushion is a 8lb decking foam. It offers strength and ensures you get a longer lasting board. The design allows your body to lock with your board when riding, ensuring the board is comfortable to ride and hold.
    Clipped Crescent Tail Information at Inverted Bodyboarding
    Clipped Crescent Tail
    The clipped crescent tail is the most popular crescent tail option.  This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
    Mesh information at Inverted Bodyboarding
    Mesh
    Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
    Nose bulb information at Inverted bodyboarding
    Nose Bulbs
    Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
    Tail Piece for Bodyboards
    Two-Piece Tail
    The tail piece is a separate piece of decking that goes on the crescent tail. Done for aesthetic purposes only and as oppose to rolling the deck all the way down over the tail.
    Indonesia Bodyboard Manufacturing

    Manufacturing Country: Indonesia/ Broady
    The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.

Product Information

Shipping & Returns

Description

-----
Bodyboard Features;
Inner Core - 1.2lb Polypro
Stringer - 1 x CFT Stringer
Rails - 55/45 Double Rails
Channels - Slotted Channels
Slick - Surlyn
Deck - Cellu-Cushion 8lb PE
Tail - Crescent (Tail Piece)
Additional Features -  Tail Piece, Mesh, XFL Armour and Slick Nose Bulbs.
Manufacturing Country - Broady/ Indonesia 

  • Understanding this bodyboard's technology

    LiteFlex 1.2lb PP
    LiteFlex 1.2lb Polypropylene Core delivers amazing projection and response.
    CFT Stringer INformation at INverted Bodyboarding Carbon Fibre/ CFT Stringer
    Lightweight filament wound carbon composite rod offering rigidity and durability.
    55 45 Rail information at Inverted Bodyboarding
    55/45 Rails
    This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
    Slotted Channel information at Inverted Bodyboarding
    Slotted Channels
    Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves.
    Surlyn plastic bodyboarding information at INverted
    DuPont Surlyn Slick
    Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
    Cellucushion Taiwan Decking information at Inverted Bodyboarding
    Cellu-Cushion 8lb PE (Taiwan) Decking
    Cellu-Cushion is a 8lb decking foam. It offers strength and ensures you get a longer lasting board. The design allows your body to lock with your board when riding, ensuring the board is comfortable to ride and hold.
    Clipped Crescent Tail Information at Inverted Bodyboarding
    Clipped Crescent Tail
    The clipped crescent tail is the most popular crescent tail option.  This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
    Mesh information at Inverted Bodyboarding
    Mesh
    Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
    Nose bulb information at Inverted bodyboarding
    Nose Bulbs
    Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
    Tail Piece for Bodyboards
    Two-Piece Tail
    The tail piece is a separate piece of decking that goes on the crescent tail. Done for aesthetic purposes only and as oppose to rolling the deck all the way down over the tail.
    Indonesia Bodyboard Manufacturing

    Manufacturing Country: Indonesia/ Broady
    The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.

Science Mike 7-7 LiteFlex 1.2lb Bodyboard | Inverted Bodyboarding